The electrical discharge machining machine uses a pulse discharge between the electrode and the workpiece to cause spark eroding to cut conductive materials. The EDM uses electrode immersed into dielectric fluid to realize high-precision machining of super-hard conductive workpieces.
C-TEK can produce EDM machines, wire -cut EDM machines, hole drilling EDM machines and tire mold EDM machines.
Quality Control of C-TEK EDM Machine
1. Control cabinet test
Incoming inspection ---- This is where we determine whether the material’s inductance, capacitance, and resistance meet our standards using an LCR meter. Only qualified products are allowed into the warehouse.
Circuit board inspection ---- Circuit board performance is tested and adjusted using a test tool and oscilloscope.
Wiring test ---- Wires are tested to ensure they are soldered properly using a testing device.
Circuit board machine test ---- Each circuit board undergoes electrical discharge testing for 4 hours for qualification.
Control cabinet stability test ---- We can detect its stability by using each control cabinet for 24 hours in an environment with a temperature of 45℃.
Body structure processing and assembly inspection ---- Every assembly step must pass the test using the dial gauge before entering the next assembly step.
2. EDM machine test
Body detection ---- Apply 3 axis accuracy detection by dial gauge and precision checking gauge. The wire will not be assembled if the body doesn’t pass the test.
Running test ---- Using EDM to drill the holes to test EDM machine's accuracy; The diameter of the hole is from the thinnest to the thickest. After drilling 14 holes, check the holes to determine whether the machine is running normally.
CNC EDM test ---- A laser is used to measure and adjust controller data to improve accuracy. Therefore, the accuracy of products can be ensured.
C-TEK Technology Corporation founded in 1991 is located in Taichung City, Taiwan. As the first company applying PC BASE to EDM and CNC milling machines in Taiwan, C-TEK has a lot of experience in producing ZNC/CNC electrical discharge machining machines, ZNC/CNC EDM machine control cabinets, CNC milling machines, wire -cut EDM machines, hole drilling EDM machines and tire mold EDM machines.