The X and Y axis of our ZNC die sinking EDM are manually controlled. Workers will aim the ZNC die sinking EDM towards the processing part and it will complete the job without the need for an editing and inputting program. This is a very convenient process and eliminates the need for expensive training and specialized equipment.
The ZNC die sinking EDM is mainly used for surface finish or deep hole machining for mold production. After processing, the surface of the workpiece will be extremely smooth and precise.
Features
More than 20,000 different mold processing conditions can be stored. Multiple sets of MCS storage function.
With a mirror surface processing circuit, a true mirror effect can be achieved.
10 segments auto editing function:
(1) Manual editing: edit the machining condition using professional knowledge.
(2) AUTOZ auto editing: max. Depths, initial current and finished procession, machining area selection are provided, and then machining condition editing can be finished automatically.
(3) FUZZY Z Intelligent condition editing: electrode shape, electrode and work piece material, work piece section area and finished precision selection, depth setting area are provided, and then machining condition edit can be finished automatically. With either the three edit methods above, machining can be completed.
X.Y.Z axis coordinates can be displayed in metric or imperial units.
X Y axis Lock function: If the workpiece becomes damaged, the X and Y axes will lock, shutting down the machine.
Z axis Lock function: Convenient discharge to revise modes with shaking apparatus.
During operation, the period and other preset conditions can be modified.
Automatic arcing detection function: if arcing and processing not stable, the computer will automatically adjust the parameters and increase deslagging height until stability is reached.
It can set 2~10 times discharging for raising the set arbitrary position. This provides good slagging off performance for deep hole machining.
Secondary discharge is eliminated.
If the electrode touches the workpiece, there is a function to quickly pull up the electrode.
Power control (EQU) function for homogenizing the machining effect. And this function can be switched off to accelerating graphite electrode machining.
Upward discharge processing function makes special processing easier.
With two independent processing coordinate systems, Male die cavities and cores can be in produced with different coordinate system points.
If power is lost, the system will restart and automatically load the last machining conditions and coordinates.
Two independent machining coordinates to protect the electrodes from tensile deformation, improving servo efficiency.
Coordinates and processing data storage function in the different processing can quickly join the same processing conditions.
With discharge time and boot time two timer function.
Two kinds of high voltage circuit can be provided according to customer needs (partial pressure or shunt).
Use industrial PC-BASE controller and DOM new memory instead of traditional hard disk Reading files faster and stability is very high.
The screen with automatic protection function, gives the screen a longer service life.
The new design conforms to the European CE safety specifications of the electric cabinet and I5 LCD (display). It is dustproof, waterproof and tamper-proof.
Parameters
Model
ZNC 320
ZNC 430
ZNC 435
ZNC 540
ZNC 650/700
Work tank(WxDxH) (mm)
880*520*330
1100*600*450
1130*710*450
1300*720*475
1650*1100*630
Work table size (mm)
600*300
650*350
700*400
800*400
1050*600
Work table travel X(mm)
300
400
450
500
650/700
Work table travel Y(mm)
200
300
350
400
550
Ram servo travel (Z-axis)(mm)
180
200
200
200
250
Work head travel (W-axis)(mm)
180
280
230/280
380
400
Max.distance from electrode plate to table (mm)
420
450
450/480
580
850
Max. electrode weight(kgs)
100
120
120
150
200
Max. workpiece weight(kgs)
800
1000
1200
1500
2000
Cross weight (kgs)
1150
1360
1550/1460
1740
2950
External dimension (WxDxH)(mm)
1300*1250*1200
1430*1180*1800
1470*1150*1980
1640*1460*2140
2000*1710*2360
Oil tank capacity(Liter)
250
400
400
460
980
Net weight (kgs)
Built-in
150
150
180
300
A Japanese DC servo motor optimizes the processing effects of the equipment because of its high stability.
Adopting ballscrews made in Taiwan, the ZNC EDM machine has high precision and can be controlled easily.
The Z axis has the linear slide made in Switzerland, so the EDM machine has high precision and can be controlled easily.
It is easy to learn and operate with interactive editing.
Standard accessories
15” LCD monitor
1 pcs working lamp & remote control box
1 pcs electrode holder & 1 set cartridge paper filters
Machine level mounts
Ballscrews & 3-axis linear scales(5μm)
1 set tools with toolbox & clamping kits
Auto fired detect system & extinguisher
Operation manual & technical data
Optional accessories
Coolant system
System 3R or EROWA Tool holders
Magnetic table & EDM oil
3-axis linear scales (1μm)
C-TEK Technology Corporation founded in 1991 is located in Taichung City, Taiwan. As the first company applying PC BASE to EDM and CNC milling machines in Taiwan, C-TEK has a lot of experience in producing ZNC/CNC electrical discharge machining machines, ZNC/CNC EDM machine control cabinets, CNC milling machines, wire -cut EDM machines, hole drilling EDM machines and tire mold EDM machines.